DK Digital CDB-600 Spécifications télécharger pdf (Page 9)

MSD Software Manual PRELIMINARY Release Chapter 4 Preset selection menu.

4 Preset selection menu.

To make the daily operation of the MSD easier the MSD has a total of eleven

possible presets, where all are user-definable. By establishing a number of

presets designed for a specific purpose, these presets can easily be recalled

for a specific job. All the presets will be fully-set with parameters such as

inputs, PPM scales, oscilloscope modes (surround or stereo), reference levels,

colour coding etc.

Depending on the MSD model a certain number of the available presets are

used as Factory Presets. The remaining preset locations will be used as USER

PRESETS. Each MSD model will have its own set of factory presets reflecting

the functionality of the specific model.

For easier setup, the configuration of the MSD (all 11 presets) can be uploaded

and edited in the Windows® program called DK-Matrix. Please refer to the

software manual for DK-Matrix for further details.

The Preset Selection Menu can easily be accessed from the ‘Application Start

List’ by selecting the item ‘Preset List’. The Preset Selection List can also be

accessed from the ‘Main Menu’ in ‘Full Feature Mode’ by pressing the

[Preset] key.

4.1 Recall a Preset. 

To recall a preset, use the [] / [] keys to move the green selection bar to

the desired preset and then press the [Select] key.

4.2 Preset Setup. 

When the MSD write protection are disabled the [Setup] key is enabled.

Please see section 4.4 on how to disable the write protection. Pressing the

[Setup] key will bring up the ‘Preset Setup Menu’.

4.2.1 Save a Preset.  

To save a preset use the [] / [] keys to move the green selection bar to the

preset which shall be replaced by the new settings.

When the save key is pressed, the selected preset will be replaced by the new

settings, and the MSD write protection will be enabled. The setup menu will

also be exited.

Please note that if preset 1 the ‘Base Setup’ has to be replaced, the [Save]

key has to be held down for about 10 seconds.

4.2.2 Default Startup Preset.  

When the MSD is powered up or restarted it will by default load preset 1 the

‘Base Setup’. It is possible to select another startup preset by moving the green

selection bar to another preset and press the [Initial] key. When a preset is

selected as the default startup preset the item in the ‘Preset List’ will be green.

PRELIMINARY Release Page 5 of 64.

The preset selection window.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Pas de commentaire

DK Digital CDB-600 Spécifications Page 9